Cold Rolling Steel Grades | - Mild Steel in Drawing, Deep Drawing, Extra Deep Drawing Grades , IF Steel
- SAE 1010, SAE 1020, SAE 1040, SAE 1045, SAE 1050, SAE 1060, SAE 1080
- Electrical Steel
- High Tensile Steel (UTS 340 – 590 Mpa)
- 16MnCr5
|
Steel Standards applicable | - JISG : 3113, 3131, 3134, 3135, 3141
- EN : 10130, 10149
- IS : 513, 1079, 7226
- BS :1449
|
Production Capacity | |
Thickness Range | - 0.30 - 4.0 mm in CRCA
- 1.60 - 6.0 mm in HRSPO
- 1.60 – 6.0 mm in HR Strips & Sheets
|
Width Range | |
Strip Temper | - Normal Soft
- Quarter, Half and Full Hard
|
Surface Finish | |
Edge Condition | - Slit edge
- Mill edge
- Sheets
|
Coil Internal Diameter | |
Coil Outer Diameter | - 1300 mm with Slit Edge
- 1800 mm with Mill Edge
|
Cut to Length Sheets | - Length : 200 - 3500 mm
- Width : 60 - 750 mm
|